It is not only paper but also ...... to print with the printer. "Full-color, 3D solid printer"

The same faction model as ZPrinter 450 System who had been exhibited

"ZPrinter 450 System" of [Z series] of 3D printer was exhibited and demonstrated in the event. As this 3D printer and a mechanism though it is also in [ catalog , PDF] etc.

*3D data is made on the personal computer. (An original making and the taking data of the thing are OK. )
*Data is transmitted to ZPrinter 450 System.
*The transmitted data is analyzed and the round slices in an innumerable layer.
*It hardens it by spraying the powder of gypsum at each data (0.089 millis) each sliced, and spraying the adhesive and the color ink inkjet ("Print. ").
*When one layer can be printed, the layer on that is printed on. It lives sequentially repeatedly, and the model of the input solid data is made up.

The one. In short, it only has to make hundreds of pieces three-dimensional repeatedly models, and to think the one or paper with a very detailed round slices side of "Contour map" often seen in the laboratory related to the science room and geology and the material pavilion to be "Model built integrating" mathematically. Let's check the structure and the mechanism of this full-color, 3D solid printer by [animation here]. (It is not possible to put it by various circumstances. )｡

How of 'Print' to do

After 'Print', most of the gypsum powder is automatically removed.

It is said that it is possible to form at the speed by 5-10 times 3D past printer in this model, and it is possible to make it for instance in 3.5 hours when 100X482X127milli nozzle the one. Moreover, the material of "Powder of gypsum" that forms the model can use "Dempmbaspaudar" that gives rubbery elasticity besides usual gypsum and "Ceramic base powder", etc. that can create the metal mold etc. of the article of cast metal as it is, and is expanded the usage variously in case of Z510 of a high-ranking model.

70 has been sold from the sale in April last year according to a former article so far (8.8 million yen each). It is said that there is a usage of use to a prior simulation etc. making models of internal organs and teeth on the design prototype and the medical treatment site of the cellular phone and the car. It doesn't limit to various parts and the idea of the new item is made solid, and moreover, the quality and the possibility are examined, and it proposes making an architectural field (construction schedule model) and the geographic information model ("Contour map" exactly enumerated in the example) in the catalog.

If it is not a person that there is very room in the financial power, ownership with an individual base might be difficult because the price is high as such. The usage such as the project development companies that can add the appeal power is variously thought if being the field, presentation, etc. from which the simulation that the DICO side presented is requested and there is a sample. When the office is excellent in the graphic design, more various ideas will be able to be invented.